Two piece ridge fitting adjustable to roof pitches not covered by standard crown cranked sheets
Minimum pitch 10o
Length 1108mm
Cover 1016mm
Two piece ridge fitting to suit roof pitches from 12o to 30o.
May be used with close fitting outer for Northlight applications
Minimum pitch 12o
Length 1108mm
Cover 1016mm
Two piece ridge fitting adjustable to roof pitch to provide ventilation.
May not be fully weather proof in swirling snow or rain.
Minimum pitch 20o
Length 1108mm
Cover 1016mm
Ventilated area – 870cm2 per unit.
For use with two piece adjustable ridge to provide neat closures of ends of ridge line.
Two piece adjustable, minimum pitch 20o. For use with 203 x 203 barge board and two piece adjustable ridge
Two piece ridge fitting adjustable to roof pitch to provide ventilation.
May not be fully weather proof in swirling snow or rain.
Minimum pitch 20o
Length 1108mm
Cover 1016mm
Ventilated area – 870cm2 per unit.
The New EuroSix 600mm Girth Crank Vent Ridge
Upmost safety is achieved for the installer in using this method of ridge fixing. This method of ridge fixing meets the requirements of the HSG-33 Health and Safety Roof Work manual.
*Measurements may vary slightly depending upon degree of roof
The New EuroSix 600mm Girth Crank Closed Ridge
Upmost safety is achieved for the installer in using this method of ridge fixing. This method of ridge fixing meets the requirements of the HSG-33 Health and Safety Roof Work manual.
*Measurements may vary slightly depending upon degree of roof
The New EuroSix 600mm Girth Crank Vent Ridge
Upmost safety is achieved for the installer in using this method of ridge fixing. This method of ridge fixing meets the requirements of the HSG-33 Health and Safety Roof Work manual.
*Measurements may vary slightly depending upon degree of roof
The New EuroSix 600mm Girth Crank Closed Ridge
Upmost safety is achieved for the installer in using this method of ridge fixing. This method of ridge fixing meets the requirements of the HSG-33 Health and Safety Roof Work manual.
*Measurements may vary slightly depending upon degree of roof
900mm Girth Crank Vent Ridge
This ridge fixing meets the requirements of HSG-33 Health and Safety Roof Work manual. NB. Please note both 1800 and 1900mm girth ridges vented fitted to the old conventional method DO NOT meet the requirements of HSG-33.
*Measurements may vary slightly depending upon degree of roof
900mm Girth Crank Closed Ridge
This ridge fixing meets the requirements of HSG-33 Health and Safety Roof Work manual. NB. Please note both 1800 and 1900mm girth ridges vented fitted to the old conventional method DO NOT meet the requirements of HSG-33.
*Measurements may vary slightly depending upon degree of roof
Two Piece Adjustable Close Fitting Ridge
This ridge fixing meets the requirements of HSG-33 Health and Safety Roof Work manual. NB. Please note the old conventional way of fitting EuroSix Two Piece Adjustable Close Fitting Ridges DO NOT meet the requirements of HSG-33.
*Measurements may vary slightly depending upon degree of roof
Two Piece Adjustable Ventilating Ridge
This ridge fixing meets the requirements of HSG-33 Health and Safety Roof Work manual. NB. Please note the old conventional way of fitting EuroSix Two Piece Adjustable Close Fitting Ridges DO NOT meet the requirements of HSG-33.
*Measurements may vary slightly depending upon degree of roof
Open Protected Ridge
This method of fixing of EuroSix open protected ridge meets the requirements of HSG-33 Health and Safety Roof Work manual. NB. Please note the old conventional way of fitting EuroSix open protected ridges DO NOT meet the requirements of HSG-33.
*Measurements may vary slightly depending upon degree of roof
Two Piece Adjustable Plain Wing Ridge
This ridge fixing meets the requirements of HSG-33 Health and Safety Roof Work manual. NB. Please note the old conventional way of fitting EuroSix Two Piece Adjustable Ventilating Fitting Ridges DO NOT meet the requirements of HSG-33.
*Measurements may vary slightly depending upon degree of roof
